Garage Door Track Adjustment & Replacement
The repairs on your garage door should depend on what issues you’re having.
Is the garage door rubbing or binding during the operation? Are there gaps and crooks on your garage door?
There must be a problem with your tracks that need adjustment and replacement.
If you’ve been encountering these issues for a while, read more to know how to perform garage door track adjustment & replacement.
Usual Track Problems
Many issues come with a damaged garage door track.
These are the usual problems:
- The garage door rubs against the molding, which makes it hard for it to move.
- The garage door is difficult to open and close.
- There are gaps at the bottom of the door.
- The garage door is off-track and crooked.
Once these issues are present in your garage door, you need to adjust or replace the tracks.
Besides, misalignment can lead to inconvenience.
Due to misalignment, you can’t open the garage door because it is binding, making it difficult for you to get out of the garage.
If the door is off-track, it might fall and cause injury to someone.
Problems can occur at any time when you have a damaged track.
Hence, fix the issue right away.
Luckily, you can fix the issues depending on the problems on your track door.
Here are the garage door track adjustment & replacement tips for you to follow:
Off-track or Crooked Overhead Doors
If your door is off-track, it would be difficult for it to move smoothly. Here’s what you can do to fix the problem:
Check the Cables and Springs
The key components that make the garage door moves within the track are the springs and cables.
If your door is off-track, check the condition of the springs and cables.
If both parts show signs of damage and wear, replace them right away.
Watch this to know how to replace springs while following the procedure in the following video to return the cables.
When in doubt, consult an emergency garage door repair in Edmonton to replace the springs and cables.
Inspect the Track
Inspect the track if you see signs of wearing and dents.
Also, check for any dirt and debris accumulating in it that can hinder the garage door’s smooth movement.
For dirt, wipe them off with a clean towel.
For visible damage on the track, you need to replace it.
Call a professional and request a track replacement.
Binding Overhead Doors
When the garage door is difficult to lift and lower, it is binding.
To unbind, perform these steps:
- Loosen the screws with the use of a screwdriver to allow for room in the tracks.
- Then, using a rubber mallet, tap the bottom of the track. This will allow you to adjust it to the correct place. To make sure it is in the right spot, use a level.
- Once the track is positioned right, tighten the screws to secure it in place.
- Repeat the steps above for the other track.
Gaps and Rubbing Overhead Doors
For overhead doors that have gaps at the bottom they can compromise the safety since external elements can quickly enter your garage.
On the other hand, rubbing garage doors can lead to significant problems such as accidents and injuries.
To address these problems, here’s what you should do:
- Loosen the bolts on the lower part of the track with a wrench.
- Then, position the tracks until there’s a ¼ inch gap from the floor. Allow the door to have a tiny gap so the garage can breathe.
- Repeat steps 1 and 2 for the other track.
- After both tracks are adjusted, tighten the bolts using a wrench. Nudge the tracks to make sure they are in place.
Fix your Garage Door Track ASAP
Whether your garage door track is binding, rubbing, or has gaps, follow one of the methods above to align it back.
There are also other issues with the track that needs professional repair, such as damaged moving parts.
If you ever encounter this issue, you can call a professional for a garage door track adjustment & replacement.
If you need track repairs, you’ve come to the right company.
Legion Garage Doors is a 24 7 garage door repair that will cater to you around the clock.
Give us a call, and we’ll perform garage door track adjustment & replacement for you.