Having garage door trouble?

    Get in touch with Legion’s garage door services in Edmonton.

    ☎️ (587) 400-3968

    Or, send a message.

    Do you have any photos?

    Garage Door Springs Replacement

    Overhead doors rely on interconnected parts to work smoothly, safely, and efficiently.

    One of the vital components of the garage door is the springs.

    They make the operation of the garage door easy.

    Due to the springs, you can lift the door with ease.

    If the springs get faulty, it will be dangerous to fix them.

    Hence, you need to leave the job to a professional.

    Furthermore, we will discuss everything you need to know about springs and when to call for a garage door springs replacement.

    Type of Springs

    Springs come in two types – torsion and extension, with each, differs in appearance and how it functions.

    Torsion Springs

    You can easily detect the garage door using a torsion spring when you can see it above the door wrapped around a tube shaft.

    Torsion springs come in pairs.

    They store a lot of tension when the garage door closes and release it when the door opens.

    Typically, torsion springs last between 15,000 to 20,000 cycles before the need for replacement.

    To make sure the springs achieve this cycle, you must take care of them.

    Extension Springs

    On the other hand, extension springs are placed at both sides of the garage door or above the door tracks.

    They are connected to the bottom part of the door through the cables.

    Like tension springs, the extension also stores energy and it stretches when the door is closed.

    Then, the extension spring contracts as it releases the energy to open the door.

    Since it stretches when the garage door is closed, it is susceptible to wear and tear.

    While an extension spring is easier to replace than torsion springs, they only last fewer cycles of about 10,000.

    Why Do Garage Door Springs Get Damaged?

    If you’re wondering why springs get damaged, these are the possible reasons:

    1. Rust

    Springs are made of metal, which means it can rust overtime when it’s exposed to air and due to frequent usage.

    If the rust develops in the garage door springs, expect the lifespan to cut short as it weakens the spring’s functionality.

    Fortunately, you can fix this issue by applying a lubricant to the springs.

    1. Lack of maintenance

    As you can leave the springs on their own to perform their role, they can also be damaged when you ignore them.

    Check the condition of the springs whether they show rust or wearing.

    There is an appropriate repair depending on the state of the spring.

    1. Wearing

    Springs usually last between at an average of 15,000 cycles.

    When they reach the limit, they wear out, and you see there are gaps between the coils.

    If you detect wear and tear on the spring, it’s best to perform a garage door springs replacement since repairs are insufficient to solve the issue.

    You can watch this video for a more detailed explanation of why garage door springs break.

    When the springs suffer from any of the conditions above, the following issues will begin to manifest in your garage door operation.

    • Issues in the movement

    If you find your garage door is jerking, closing too fast, or stops moving after opening, this could mean that the springs are worn out or damaged.

    Make sure not to manually open or close the door as it may cause injury to you.

    Talk with a residential or commercial garage door repair in Edmonton to diagnose your garage door properly.

    • Noisy Operation

    When the spring is damaged, it may cause the door to produce a loud bang or noise.

    This happens because the spring suddenly snaps or breaks during the operation, especially for torsion springs.

    • Visible Gaps

    If there are gaps between the springs, you won’t be able to enjoy a smooth operation in your garage door.

    Gaps indicate a lack of tension that is necessary for opening or closing the garage door.

    • Bent Doors

    If you have a broken spring, the door might bend if you try to open it.

    As the spring enables you to lift the door quickly, it won’t be the case anymore.

    You’re raising the door with its full weight because the broken spring cannot assist any longer.

    Hence, this leads to the bending of the door.

    • Unable to lift the door manually

    When you try to lift the door manually using an emergency release cord and it won’t open, the spring is likely damaged.

     How Frequently Should You Replace the Springs?

    The simplest answer to this question is when you have encountered the issues above, replace the springs right away.

    Remind you that springs are dangerous to replace, so it’s best to leave the job to a professional.

    With this, Legion Garage Doors in Edmonton will perform the garage door springs replacement for you.

    Call us if you need assistance to make sure the replacement is successfully done.

    Rate this page


    How To Replace A Broken Garage Door Roller

    How To Replace A Broken Garage Door Roller

    Garage door rollers are minor but very necessary parts of your overhead garage door. Without your garage door rollers, opening and closing your overhead garage doors would more difficult and inconvenient. Rollers function by guiding your garage doors during the opening and closing whilst making

    How To Replace A Broken Garage Door Torsion Spring

    How To Replace A Broken Garage Door Torsion Spring

    The use of garage doors for both residential and commercial purposes has become more popular as time passes by. They have become an essential part of our daily lives that it is hard to imagine living in a world without them. When your garage door

    Industrial Garage Door Repair Company in Edmonton

    Industrial Garage Door Repair Company in Edmonton

    Commercial or industrial garage doors are commonly used for business-related needs such as in warehouses, storage houses, truck parking lots, and many more. Industrial garage doors are relied on because they provide shelter, security, and protect the different things that are being stored inside. Without

    garage door opener bracket

    How to Install a Garage Door Opener Bracket

    Installing a garage door opener bracket is not as difficult as it may seem. In fact, with the right tools and instructions, it can be a relatively easy process. In this blog post, we will provide you with all the information you need to install

    barcol garage door repair edmonton barcol garage doors edmonton chamberlain garage door opens by itself commercial door repair edmonton commercial overhead door preventive maintenance checklist commercial overhead door prices commercial roll up doors creative door edmonton edmonton garage door repair garage door adjustment do it yourself garage door maintenance checklist garage door maintenance cost garage door maintenance lubrication garage door maintenance service near me garage door opener only works up close garage door opens by itself after closing garage door opens sporadically garage door phantom opening garage door repair garage door repair edmonton reviews garage door repair near me garage door repairs edmonton garage door repair sherwood park garage door repair st albert garage door spring repair do it yourself garage door spring repair near me garage door spring tension chart ghost opening garage door how to adjust a garage door gap how to adjust a garage door that is crooked how to adjust garage door cables how to adjust garage door springs and cables how to fix garage door cable how to fix up and over garage door cable how to install garage door springs and cables how to replace garage door side springs how to stop garage door from opening merlin garage door opening by itself overhead door overhead door edmonton reviews residential roll up garage doors roll up garage door prices why does my garage door keep opening after i close it why garage door opened for no reason youtube garage door opens by itself