Garage Door Rollers, Hinges & Sensors Repair
Malfunctioning garage doors are a significant inconvenience.
While you think you can save money and time in fixing it yourself, some repairs can be done best by a professional in Edmonton.
If you find your door is off-track, challenging to close, and producing squeaky noise, then leave the repairs to the pros.
These problems need garage door rollers, hinges & sensors repair.
Read further to find more about rollers, hinges, and sensors and when to call for an emergency garage door repair in Edmonton.
All About Rollers, Hinges, and Sensors
Before you decide on the repairs, read further to know more about rollers, hinges, and sensors.
Garage door rollers lie along the tracks to secure the door’s movement.
They allow the door to move smoothly and within the tracks.
There are three different types of rollers in the market – nylon, plastic, and steel.
A nylon roller is the most expensive out of the bunch since it’s the best performing and lasts for 10 to 20 years.
On the other hand, a plastic roller is the most common and cheapest type.
However, they can be susceptible to breaks and cracks and only last for a few years.
A steel roller is prone to rust and can be noisy during the operation.
However, it’s durable and can last for 10 to 15 years when well-maintained.
Depending on how you take care of your rollers, they will last long regardless of their type.
But if you’re using your garage door more frequently, don’t be shocked if they’re starting to crack and break.
Hinges are one of the vital parts of a garage door system.
They connect overhead doors to keep them secure in place.
Similar to rollers, they come in different types.
To make sure they last longer, consider buying a thicker metal compared to thin ones.
You can also ask help from a residential or commercial garage door repair in Edmonton to know more.
Hinges can be a lot of stress when you use your garage door all the time.
Hence, check the hinges for rust or wear.
If they are corroded, lubricate them.
If it’s wearing, you need to replace them quickly to prevent a noisy and breaking door.
A sensor is an electrical safety device that controls the door’s movement according to different conditions.
If the sensor detects an object along the door’s path, it will signal the opener to stay open to prevent damage to the object.
On the other hand, the sensor will allow the door to close if no obstruction is found.
Hence, a sensor provides safety to the garage door operation to prevent injuries to you, your family, and your belongings.
As with all garage door parts, sensors can get faulty due to lack of maintenance, misalignment, and dirty photo-eyes.
To keep the condition of your sensors, maintain them all the time.
Make sure to clean when you see dirt on the sensors.
If you find your door is not closing, check the alignment of the sensors.
To align the sensors, watch this video.
However, if you think the sensors have problems, ask for help from a professional to diagnose the problem.
When to Call for Professional Repairs
Moreover, these are the signs you need garage door rollers, hinges & sensors repair.
When in doubt, you can also check the problem with a professional to give you a more detailed and accurate diagnosis.
- Popping noise when the door moves
- Loose roller
- Visible cracks and rust
- The garage door vibrates during the operation
- Squeaky noise operation
- Loose hinges
- Broken hinges
- Stuck pin
- The garage door is not closing.
- The garage door reverses back after touching the floor.
Once you have encountered these issues, don’t hesitate to call a professional in Edmonton to conduct garage door rollers, hinges & sensors repair.
While a DIY fix can save you time and money, it’s never the best solution.
Especially if you don’t have enough skills and expertise to work on the rollers, hinges, and sensors, you’ll only cause more damage to the garage door.
When you lack in handyman skills, don’t hesitate to call Legion Garage Doors in Edmonton.
We provide 24 7 garage door repairs to cater to you any time of the day.
Leave the job to us, and we’ll make your garage door fully-functional again!