Need a Spring Replacement?
Overhead doors rely on interconnected parts to work smoothly, safely, and efficiently.
One of the vital components of the garage door is the springs.
They make the operation of the garage door easy.
Due to the springs, you can lift the door with ease.
If the springs get faulty, it will be dangerous to fix them.
Hence, you need to leave the job to a professional.
Furthermore, we will discuss everything you need to know about springs and when to call for a garage door springs replacement.
Type of Springs
Springs come in two types – torsion and extension, with each, differs in appearance and how it functions.
Torsion Springs
You can easily detect the garage door using a torsion spring when you can see it above the door wrapped around a tube shaft.
Torsion springs come in pairs.
They store a lot of tension when the garage door closes and release it when the door opens.
Typically, torsion springs last between 15,000 to 20,000 cycles before the need for replacement.
To make sure the springs achieve this cycle, you must take care of them.
Extension Springs
On the other hand, extension springs are placed at both sides of the garage door or above the door tracks.
They are connected to the bottom part of the door through the cables.
Like tension springs, the extension also stores energy and it stretches when the door is closed.
Then, the extension spring contracts as it releases the energy to open the door.
Since it stretches when the garage door is closed, it is susceptible to wear and tear.
While an extension spring is easier to replace than torsion springs, they only last fewer cycles of about 10,000.
Why Do Garage Door Springs Get Damaged?
If you’re wondering why springs get damaged, these are the possible reasons:
-
Rust
Springs are made of metal, which means it can rust overtime when it’s exposed to air and due to frequent usage.
If the rust develops in the garage door springs, expect the lifespan to cut short as it weakens the spring’s functionality.
Fortunately, you can fix this issue by applying a lubricant to the springs.
-
Lack of maintenance
As you can leave the springs on their own to perform their role, they can also be damaged when you ignore them.
Check the condition of the springs whether they show rust or wearing.
There is an appropriate repair depending on the state of the spring.
-
Wearing
Springs usually last between at an average of 15,000 cycles.
When they reach the limit, they wear out, and you see there are gaps between the coils.
If you detect wear and tear on the spring, it’s best to perform a garage door springs replacement since repairs are insufficient to solve the issue.
You can watch this video for a more detailed explanation of why garage door springs break.
When the springs suffer from any of the conditions above, the following issues will begin to manifest in your garage door operation.
-
Issues in the movement
If you find your garage door is jerking, closing too fast, or stops moving after opening, this could mean that the springs are worn out or damaged.
Make sure not to manually open or close the door as it may cause injury to you.
Talk with a residential or commercial garage door repair in Edmonton to diagnose your garage door properly.
-
Noisy Operation
When the spring is damaged, it may cause the door to produce a loud bang or noise.
This happens because the spring suddenly snaps or breaks during the operation, especially for torsion springs.
-
Visible Gaps
If there are gaps between the springs, you won’t be able to enjoy a smooth operation in your garage door.
Gaps indicate a lack of tension that is necessary for opening or closing the garage door.
-
Bent Doors
If you have a broken spring, the door might bend if you try to open it.
As the spring enables you to lift the door quickly, it won’t be the case anymore.
You’re raising the door with its full weight because the broken spring cannot assist any longer.
Hence, this leads to the bending of the door.
-
Unable to lift the door manually
When you try to lift the door manually using an emergency release cord and it won’t open, the spring is likely damaged.
How Frequently Should You Replace the Springs?
The simplest answer to this question is when you have encountered the issues above, replace the springs right away.
Remind you that springs are dangerous to replace, so it’s best to leave the job to a professional.
With this, Legion Garage Doors in Edmonton will perform the garage door springs replacement for you.
Call us if you need assistance to make sure the replacement is successfully done.
